cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
816
Views
0
Helpful
1
Replies

ASR1000 MLPPP speedlimit?

hk_net
Level 1
Level 1

This is what happens: ASR1001-X (16.03.07) and ASR1002-F (03.16.10.S) behave similarily:

mlppp connection gets established by CPE, but each virtual link seems to only carry at most 100 mbps.

if the CPE disconnects one link it works its way up to 260 mbps on each single link.

but combined bandwidth download is kind of limited to 100mbps per link.

(CPE CPU is running at 50-60% during those tests so there would be room for more downloads...)

 

anyone ever seen this?

1 Accepted Solution

Accepted Solutions

hk_net
Level 1
Level 1
well, the magic of quantum-flow somehow respects virtual-interfaces bandwidth value in its MLPPP packet per second calculation - or at least it seems this way :)

change the bandwidth to some very-high-value (1gbps) in your virtual-template and MLPPP will give you unlimited bandwidth - or at least as much as your access-services can provide....

View solution in original post

1 Reply 1

hk_net
Level 1
Level 1
well, the magic of quantum-flow somehow respects virtual-interfaces bandwidth value in its MLPPP packet per second calculation - or at least it seems this way :)

change the bandwidth to some very-high-value (1gbps) in your virtual-template and MLPPP will give you unlimited bandwidth - or at least as much as your access-services can provide....