10-12-2015 04:24 AM - edited 03-22-2019 12:56 AM
I have ASR1006 with the image asr1000rp1-advipservicesk9.02.06.01.122-33.XNF1.bin
When I wanted to check for the rate of a specific session (user) , I used the command
sh vpdn session packets rate interface virtual-access x
When I upgraded the router to the IOS image asr1000rp1-advipservices.03.13.03.S.154-3.S3-ext.bin
Do not seem to find it , any ideas?
Thanks
10-12-2015 09:59 AM
Hello
the new image that you are using is not a K9 image, so the security features might not be enabled.
Could you please upgrade with a K9 image.
10-13-2015 12:08 AM
Hi
Am not deploying any security features on the box , it's only PPPoE termination box
BR,
Mohammad
10-13-2015 10:07 AM
I agree but there is a difference between the feature set in two images that you mentioned.
I would also like to know, if the VPDN session is not being created or its just you are not seeing the CLI.
10-13-2015 12:05 PM
I think this command has been deprecated and instead, you can run it using show pppoe session interface <>. Hope this helps.
i checked on 15.5 release and couldnt find show vpdn session command.
10-14-2015 12:09 AM
Hi Vinit
I have tried the command show pppoe session , but it will match only on the physical interfaces not on the virtual-access interfaces
Seems the command is really deprecated :)
BR,
Mohammad
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide