Attempting to set up a C1111-4PLTEEA router to use a 4G sim for the first time in the UK.
We have a multi-sim from EE, which can connect to multiple providers.
The output below implies it is trying to connect to the 3 UK network, with no service
Can anyone advise, from the output below, is this just a poor signal issue?
router#show cell 0/2/0 net
Current System Time = Sun Jan 6 6:3:19 1980
Current Service Status = No service
Current Service = Unknown
Current Roaming Status = Roaming
Network Selection Mode = Automatic
Network = 3 UK
Mobile Country Code (MCC) = 234
Mobile Network Code (MNC) = 20
Packet switch domain(PS) state = Not attached
LTE Carrier Aggregation state = Deconfigured
Location Area Code (LAC) = 0
Cell ID = 0
Network MTU = Not Available
router#show cell 0/2/0 rad
Radio power mode = Online
Channel Number = 0
Current Band = Unknown
Current RSSI(RSCP) = -96 dBm
Current ECIO = -11 dBm
Primary Scrambling Code = 496
Radio Access Technology(RAT) Preference = AUTO
Radio Access Technology(RAT) Selected = UMTS
router#
