cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
879
Views
5
Helpful
1
Replies

[Cisco FAQ] - Do I load new CODE and LICENSES to the RFGW1?

mentrej
Beginner
Beginner

I would like to know where I can find the latest code

1 Accepted Solution

Accepted Solutions

ronhanso
Beginner
Beginner

All new code and licenses are loaded to the RFGW1 via a FTP server on the same network as the chassis. A laptop can also be used (if plugged direct) and the interface settings are in the same network as the gateway. The laptop must be running a simple FTP server.

Settings for the FTP server are locatred at the bottom of the page.  Click "show FTP settings".

View solution in original post

1 Reply 1

ronhanso
Beginner
Beginner

All new code and licenses are loaded to the RFGW1 via a FTP server on the same network as the chassis. A laptop can also be used (if plugged direct) and the interface settings are in the same network as the gateway. The laptop must be running a simple FTP server.

Settings for the FTP server are locatred at the bottom of the page.  Click "show FTP settings".

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers