cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1532
Views
0
Helpful
2
Replies
icemanvl1
Beginner

Cisco SCE 8000 rebooting

Hi!

Cisco SCE 8000 working normally while traffic through it not pass. When i connect optical links and start passing traffic throught cisco, i have a problem. SCE watchdog run software reboot with error:

2013-09-30 13:54:40 | FATAL | CPU #000 | A problem occurred in the  SCE8000 Service Control Module Extended (SCM-E) slot 1 ,Please report to Cisco's customer support.

2013-09-30 13:54:40 | ERROR | CPU #000 | SE Watchdog Module: An Error occurred. Please report to Cisco's customer support

2013-09-30 13:54:40 | ERROR | CPU #000 | SE Watchdog Module: An Error occurred. Please report to Cisco's customer support

2013-09-30 13:54:41 | WARN  | CPU #000 | SE Watchdog Module: A problem occurred. Please report to Cisco's customer support

2013-09-30 13:54:41 | INFO  | CPU #000 | Party data base was closed.

In debug file i found:

Interrupt Received from: SimbaDPT[0].Tx[0].CTX_ISR.ECCMultiErrorInt - description: RLDRAM ECC multi bit error interrupt.

What the problem could be?

2 REPLIES 2

Hi Mike,

Which SCOS version do you use? We have such issue with SCOS 3.8.0. There are no problems after upgrade to 3.8.5.

I have tried 3.7.2, 3.8.5, 4.0.0.  Unfortunately, the result is the same. I think that hardware problem (RAM).