Hi, I'm facing issues with a CEM interface, the controller E1 is show Up, also CEM Interface, so I only have ingress packets, not outgoing someone can guide me with troubleshoting or any idea what's happen? see log file.
192.168.10.1#show cem circuit detail
CEM0/1, ID: 0, Line: UP, Admin: UP, Ckt: ACTIVE
Controller state: up, T1/E1 state: up
Idle Pattern: 0xFF, Idle CAS: 0x8
Dejitter: 5 (In use: 0)
Payload Size: 256
Framing: Unframed
CEM Defects Set
Packet Loss