09-21-2012 11:17 AM
Hello experts,
how can I access firmware releases for the rfgw1?
regards,
Michael
Solved! Go to Solution.
01-03-2013 08:19 AM
Hi Jamie,
Yes the software site for RFGW1 is not up right now. 6.1.0 MAY be out next week - it is in final paperwork for release.
If you send me an email at ronhanso@cisco.com I will reply with a copy of 1.0.19 and 3.01.08. You should atleast get up to that. Then check with me next week and I may be able to send you 6.1.0. I believe 6.1.0 is about 17 MB zipped. Will your mail server take that? Or I will need to FTP to you.
RON HANSON
01-03-2013 07:42 PM
Hi Ronald ,
I read RFGW1 Software release 6.00.12 release note,but the softwarew version does not reslove CSCtr91331 bug(SNMP walk on IP MIB will cause RFGW1 to reboot).
Do you know which software version fix the bug and when release the version?
Because the issue occur on my two sites.
01-04-2013 05:44 AM
Hi hsinglin,
The MIB walk issue is known on 3.1.8 code. Not sure your interest in 6.00.12 code which is VOD primarily.
Do you see MIB walk issues in the 6.00.x branch of code such as 6.00.07?
IF you are running 3.1.8 code and NOT running 96 channels we could roll back to 3.1.6 which does not have the MIB walk issue but only supports 48 channel operation.
Second option is new code 6.1.0 takes the place of ALL previous code and can be used for all applications.
This code is scheduled for release next week but could be delayed briefly.
Please let me know your choice.
If you would like 3.1.6 code for now please send an email to me ronhanso@cisco.com and I will attach and return 3.1.6 code.
OR check with me mid next week on 6.1.0s release.
Thanks RON HANSON
01-06-2013 10:26 PM
These RFGW1 running 96 channels,so i will wait new code 6.1.0.
01-31-2013 07:34 PM
New code 6.1.2 had released,but i don't fine the bug CSCtr91331 be fixed.
02-01-2013 06:55 AM
I confirmed with Engineering that the MIB walk issue has been resolved.
Do you have 6.1.2 ajax? (was released as .2) ?
If you do not have the ajax code please send me a email at ronhanso@cisco.com and I will send you the link.
This site will not let me copy hyperlinks in and it is quite long.
Thanks RON HANSON
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide