03-13-2014 01:13 AM - edited 03-01-2019 02:45 PM
Hi All,
I'm having issues dowloading an IOS from FTP server. Connectivity was already checked and verified.
See error below;
switch#copy tftp bootflash:
Address or name of remote host []? 146.10.67.69
Source filename []? out/cat4500e-entservicesk9-mz.122-53.SG4.bin
Destination filename [cat4500e-entservicesk9-mz.122-53.SG4.bin]?
Accessing tftp://146.10.67.69/cat4500e-entservicesk9-mz.122-53.SG4.bin...
%Error opening tftp://146.170.67.68/cat4500e-entservicesk9-mz.122-53.SG4.bin (No such device)
When I tried to save a text file to the bootflash, it won't save.
switch#copy run bootflash:config.txt
Destination filename [config.txt]?
%Error opening system:/running-config (No such device)
switch#
I can write on the nvram
switch#wr
Building configuration...
Compressed configuration from 39462 bytes to 13833 bytes[OK]
switch#
Can we concluded that my bootflash is corrupted?
Cheers,
Sheila
03-13-2014 03:53 PM
Post the output to the following commands:
1. sh version;
2. sh bootvar; and
3. dir sup-bootflash:
03-13-2014 08:34 PM
Hi Leo,
See details below;
switch#sh ver
Cisco IOS Software, Catalyst 4000 L3 Switch Software (cat4000-I5S-M), Version 12.2(25)EWA10, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Wed 11-Jul-07 00:44 by dchih
Image text-base: 0x10000000, data-base: 0x114BC038
ROM: 12.2(31r)SG3
Dagobah Revision 226, Swamp Revision 32
switch uptime is 20 weeks, 5 days, 7 hours, 56 minutes
System returned to ROM by power-on
System restarted at 19:36:50 GMT Sat Oct 19 2013
System image file is "bootflash:cat4000-i5s-mz.122-25.EWA10.bin"
cisco WS-C4506 (MPC8245) processor (revision 14) with 524288K bytes of memory.
Processor board ID XXXXXXXX
MPC8245 CPU at 333Mhz, Supervisor IV
Last reset from PowerUp
24 Virtual Ethernet interfaces
48 FastEthernet interfaces
32 Gigabit Ethernet interfaces
403K bytes of non-volatile configuration memory.
Configuration register is 0x2101 (will be 0x2102 at next reload)
switch#sh bootvar
BOOT variable =
CONFIG_FILE variable does not exist
BOOTLDR variable does not exist
Configuration register is 0x2101 (will be 0x2102 at next reload)
switch#dir sup-boot
switch#dir sup-bootflash:
^
% Invalid input detected at '^' marker.
switch#dir
Directory of bootflash:/
1 -rwx 12402868 Oct 27 2007 14:44:02 +00:00 cat4000-i5s-mz.122-25.EWA10.bin
2 -rwx 12403328 Oct 2 2008 02:34:24 +00:00 cat4000-i5s-mz.122-25.EWA12.bin
61341696 bytes total (36535244 bytes free)
switch#dir sup-bootflash
%Error opening bootflash:/sup-bootflash (File not found)
switch#
switch#
Also to add, we have a flash on Slot0: and having the same issue. I have tried to reformat it then copy the IOS again but still no luck.
switch#sh file system
File Systems:
Size(b) Free(b) Type Flags Prefixes
* 61341696 36535244 flash rw bootflash:
63897600 63897600 flash rw slot0:
- - opaque rw system:
- - opaque ro crashinfo:
524284 522948 flash rw cat4000_flash:
413676 394189 nvram rw nvram:
- - opaque rw null:
- - opaque ro profiler:
- - network rw tftp:
- - network rw rcp:
- - network rw http:
- - network rw ftp:
- - opaque ro cns:
switch#format slot0:
Format operation may take a while. Continue? [confirm]
Format operation will destroy all data in "slot0:". Continue? [confirm]
Enter volume ID (up to 64 chars)[default slot0]:
Format of slot0 complete
switch#
switch#copy ftp slot0:
Address or name of remote host []? 146.170.67.68
Source filename []? out/cat4500e-entservicesk9-mz.122-53.SG4.bin
Destination filename [cat4500e-entservicesk9-mz.122-53.SG4.bin]?
Accessing ftp://146.170.67.68/out/cat4500e-entservicesk9-mz.122-53.SG4.bin...
%Error opening ftp://146.170.67.68/out/cat4500e-entservicesk9-mz.122-53.SG4.bin (No such device)
switch#
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide