Hi Experts,
My company has OSR 7609 routers running with IOS 12.2(33)SRC3 code and i need to upgrade to SRE14, the latest code in that train.
How can i check the configuration command change and any behaviral difference between the two code.
After upgrade, using the unix 'diff' tool, i have noticed the defualt commands are changed on several lines (ethere removed or added). Is there any Cisco website or tools that list all the changes? Also, need to know any show output change between the two codes as well as any configuration command behaviral/effect changes.
specs are as below:
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
2 48 SFM-capable 48-port 10/100 Mbps RJ45 WS-X6548-RJ-45 SAL0728GK8B
3 24 CEF720 24 port 1000mb SFP WS-X6724-SFP SAL09433PJG
5 2 Route Switch Processor 720 (Active) RSP720-3CXL-GE JAE144106B4
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
2 0008.7dc9.b840 to 0008.7dc9.b86f 5.2 6.3(1) 8.7(0.22)FW2 Ok
3 0015.629b.6818 to 0015.629b.682f 2.11 12.2(14r)S5 12.2(33)SRE1 Ok
5 0023.eb0e.cdb4 to 0023.eb0e.cdb7 5.12 12.2(33r)SRD 12.2(33)SRE1 Ok
Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
3 Distributed Forwarding Card WS-F6700-DFC3CXL SAL1433QHBU 1.8 Ok
5 Policy Feature Card 3 7600-PFC3CXL JAE14410F3Z 1.1 Ok
5 C7600 MSFC4 Daughterboard 7600-MSFC4 JAE1441089S 1.6 Ok
Thanks in advance!
-Won.
