Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi experts,
I need the IOS-XR command equivalent to the IOS command 'ip default-network'.
In IOS, this command is used to set the candidate path for the gateway of last resort.
#sh ip route
---snip---
Gateway of last resort is x.x.x.x to network ...
Hi Cisco Experts,
BGP MED is non-transitive BGP attribute and the MED value learned from an eBGP peer will not be advertised to other eBGP peer, by default on IPv4.
The question is, for MPLS VPN between two VRF sites with BGP is running as PC-CE pr...
Hi Experts,
My company has OSR 7609 routers running with IOS 12.2(33)SRC3 code and i need to upgrade to SRE14, the latest code in that train.
How can i check the configuration command change and any behaviral difference between the two code.
After ...
Hello Experts, ASR1k IOS-XE are deployed as RR for IPv4/VPNv4 and it works great. But, recently we are looking into adding new RR function for L2VPN VPWS (BGP used for both Auto-discovery and Signaling, RFC 4761). The VPWS (BGP for both AD and Signal...
Adam,
Thanks for the update. Your assumption is correct and your suggested method maybe way to go.
Though the 'track' relevant configuration is more complicate than of the legacy 'default-network' command, i am considering to use 'recursive static ...
the usage of the cmd:
As having multiple Tier 1 Transit provider connected to us, bare static route is not an efficient way to handle the default path out to Tier1 network. for example, if the Tier 1 provider network impaired, while the direct BGP se...
Hi Vinit, I have added the cmd 'prefix-length-size 2' on the l2vpn neighbor configuraion, but the issue persist, even after BGP hard clear.the ASR1k RR(IOS-XE) has two l2vpn PE neighbor and this is happening only on one sessoin. both session and both...
1. how about in 'l3' profile with Trident, but not l3xl? does it differ?2. I am still not clear what the mpls label limit applies... does it count the remote PE advertised Label or not? the cmd 'sh mpls label table sum' display including the remote P...
