problem when deploy QOS on 6509 & 7609

[cockfly1987]

I want to deploy QOS on two cisco 6509 stacking by vss to limit the transmit rate of some applications.but when i deploy the service-policy on an port-channel interface.it says "MQC features are not supported in output direction for this interface",there is a same problem when i deploy the same policy on an 7609.the ios version information of 6509 is "s72033_rp Software (s72033_rp-ADVENTERPRISEK9_WAN-M), Version 12.2(33)SXI1",the ios version information of 7609 is "c7600rsp72043_rp Software (c7600rsp72043_rp-ADVENTERPRISEK9-M), Version 12.2(33)SRD2",is there a command can solve the problem or should i update the ios ?

[Giuseppe Larosa]

Hello Jiyuan,

post the policy-map configuration to see what actions are configured on it.

see egress QoS restrictions

Egress PFC QoS Interfaces

You can attach an output policy map to a Layer 3 interface (either a LAN port configured as a Layer 3 interface or a VLAN interface) to apply a policy map to egress traffic.

---

Note•Output policies do not support microflow policing.

•You cannot apply microflow policing to ARP traffic.

•You cannot set a trust state in an output policy.

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/qos.html#wp1690043

Hope to help

Giuseppe

[cockfly1987]

Hi Giuseppe,

thanks for you help

police-map xxxx
class-map  xxxx
bandwidth percent 30
class-map  xxxx
bandwidth percent 20

class class-default
fair-queue
random-detect

an example of my configuration,it seems that the 6509 & 7609 do not support the MQC,how can i slove this problem?

[cockfly1987]

thanks for you help,waiting for your reply

--- 10年1月1日，周五, giuslar 写道：

发件人: giuslar

主题: New message: "problem when deploy QOS on 6509 & 7609"

收件人: "Jiyuan Gong"

日期: 2010年1月1日,周五,上午2:30

Jiyuan Gong,

A new message was posted in the Discussion thread "problem when deploy QOS on 6509 & 7609":

https://supportforums.cisco.com/message/2011576#2011576

Author  : giuslar

Profile : https://supportforums.cisco.com/people/giuslar

Message: