11-04-2013 02:03 PM - edited 03-01-2019 02:43 PM
Looking for a Cisco Partner to assist us in setting these up. Message me with contact info.
We are replacing our current DS3 transport with the ASR1002 routers. We have 2x SPA-2CHT3-CE ATM cards in each ASR. I have beat my head against this setup for a few days now, and I fear my brain may catch fire soon. I have ZERO experience with MPLS and ATM, and I have combed through the Cisco config manuals, trying just about every configuration. Nothing is working. The two ASRs are just connected to each other on the test bench, with a TBERD on one end of T3 0/0/1 and a loopback cable on the other ASR T3 0/0/1. The two routers will not send the DS3 traffic through. MPLS seems to work, as LDP discovery is functional, but I just can't figure this out. I will attach the running-configs of both routers in the hopes that someone can tell me what I've done wrong. I wouldn't be surprised if I'm WAY off in my configurations.... Thanks in advance for all your help.
Current configuration : 2710 bytes
!
! Last configuration change at 14:04:42 UTC Fri Nov 1 2013
!
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
no platform punt-keepalive disable-kernel-core
!
hostname OMKASR1002
!
boot-start-marker
boot system flash bootflash:asr1000rp1-advipservicesk9.03.04.02.S.151-3.S2.bin
boot-end-marker
!
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
card type t3 0 1
card type t3 0 2
enable secret 4 DUF2LnlhU6Wdnms8zynYLdgm99WgitV9kb3TFi.BzR6
!
no aaa new-model
!
!
multilink bundle-name authenticated
!
!
redundancy
mode none
!
controller T3 0/1/0
description DS3.001
cablelength 224
atm
!
controller T3 0/1/1
description DS3.002
cablelength 224
atm
!
controller T3 0/2/0
description DS3.003
cablelength 224
atm
!
controller T3 0/2/1
description DS3.004
cablelength 224
atm
!
!
interface Loopback0
ip address 172.16.5.130 255.255.255.255
!
interface GigabitEthernet0/0/0
mtu 6000
ip address 172.16.5.161 255.255.255.224
no negotiation auto
mpls ip
!
interface GigabitEthernet0/0/1
no ip address
shutdown
negotiation auto
mpls ip
!
interface GigabitEthernet0/0/2
no ip address
shutdown
negotiation auto
!
interface GigabitEthernet0/0/3
no ip address
shutdown
negotiation auto
!
interface GigabitEthernet0
description MGMT
vrf forwarding Mgmt-intf
ip address 172.16.5.131 255.255.255.224
shutdown
negotiation auto
!
interface ATM0/1/0
no ip address
!
interface ATM0/1/0.1 point-to-point
pvc 5/128 l2transport
xconnect 172.16.5.132 1 encapsulation mpls
!
!
interface ATM0/1/1
no ip address
!
interface ATM0/1/1.1 point-to-point
pvc 1/96 l2transport
xconnect 172.16.5.132 2 encapsulation mpls
!
!
interface ATM0/2/0
no ip address
!
interface ATM0/2/0.1 point-to-point
pvc 2/32 l2transport
xconnect 172.16.5.132 3 encapsulation mpls
!
!
interface ATM0/2/1
no ip address
!
interface ATM0/2/1.1 point-to-point
pvc 3/64 l2transport
xconnect 172.16.5.132 4 encapsulation mpls
!
!
router ospf 1
router-id 172.16.5.130
network 0.0.0.0 255.255.255.255 area 0
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
!
mpls ldp router-id Loopback0 force
!
!
control-plane
!
line con 0
exec-timeout 0 0
password 7 01030F075358515D79
logging synchronous
stopbits 1
line aux 0
stopbits 1
line vty 0 4
password 7 105E001A0D44455954
logging synchronous
login
line vty 5 15
password 7 06160622441D5E4B5D
logging synchronous
login
!
end
Current configuration : 2722 bytes
!
! Last configuration change at 15:08:03 UTC Fri Nov 1 2013
!
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
no platform punt-keepalive disable-kernel-core
!
hostname SPOASR1002
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
card type t3 0 1
card type t3 0 2
enable secret 4 DUF2LnlhU6Wdnms8zynYLdgm99WgitV9kb3TFi.BzR6
!
no aaa new-model
!
!
multilink bundle-name authenticated
!
!
redundancy
mode none
!
controller T3 0/1/0
description DS3.001
clock source line
cablelength 224
atm
!
controller T3 0/1/1
description DS3.002
clock source line
cablelength 224
atm
!
controller T3 0/2/0
description DS3.003
clock source line
cablelength 224
atm
!
controller T3 0/2/1
description DS3.004
clock source line
cablelength 224
atm
!
!
interface Loopback0
ip address 172.16.5.132 255.255.255.255
!
interface GigabitEthernet0/0/0
description DS3 IP TUBE
mtu 6000
ip address 172.16.5.162 255.255.255.224
no negotiation auto
mpls ip
!
interface GigabitEthernet0/0/1
no ip address
shutdown
negotiation auto
mpls ip
!
interface GigabitEthernet0/0/2
no ip address
shutdown
negotiation auto
!
interface GigabitEthernet0/0/3
no ip address
shutdown
negotiation auto
!
interface GigabitEthernet0
description MGMT
vrf forwarding Mgmt-intf
ip address 172.16.5.133 255.255.255.224
negotiation auto
!
interface ATM0/1/0
no ip address
!
interface ATM0/1/0.1 point-to-point
pvc 5/128 l2transport
xconnect 172.16.5.130 1 encapsulation mpls
!
!
interface ATM0/1/1
no ip address
!
interface ATM0/1/1.1 point-to-point
pvc 1/96 l2transport
xconnect 172.16.5.130 2 encapsulation mpls
!
!
interface ATM0/2/0
no ip address
!
interface ATM0/2/0.1 point-to-point
pvc 2/32 l2transport
xconnect 172.16.5.130 3 encapsulation mpls
!
!
interface ATM0/2/1
no ip address
!
interface ATM0/2/1.1 point-to-point
pvc 3/64 l2transport
xconnect 172.16.5.130 4 encapsulation mpls
!
!
router ospf 1
router-id 172.16.5.132
network 0.0.0.0 255.255.255.255 area 0
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
!
mpls ldp router-id Loopback0 force
!
!
control-plane
!
!
!
!
!
line con 0
exec-timeout 0 0
password 7 01030F075358515D79
logging synchronous
stopbits 1
line aux 0
stopbits 1
line vty 0 4
password 7 105E001A0D44455954
logging synchronous
login
line vty 5 15
password 7 06160622441D5E4B5D
logging synchronous
login
!
end
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide