06-11-2013 07:57 AM - edited 07-04-2021 12:13 AM
Hi,
Can someone send me information about best practice and limitation for AP mode local (LAP 1231A/G with controller 5508 release 7.0.x),
the official documentation don’t display nothing on this argument.
thanks
S.
06-11-2013 11:10 AM
Best practice is usually for the WLC setup and design. Not really best practice for AP's and code versions. Here are the best practice docs.
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a0080810880.shtml
Sent from Cisco Technical Support iPhone App
06-11-2013 01:40 PM
Ok, are there some limitation in that mode (local)?, I tested it and from official cisco site i found that :
A Local mode AP, tunnels all traffic to the Controller (via CAPWAP), where the Controller handles tagging the packets and placing them on the wired network.
Can you send me other info or limitation ?
06-11-2013 05:40 PM
That's not a limitation, that is how its designed. You are limited when using FlexConnect mode not local mode.
Sent from Cisco Technical Support iPhone App
06-12-2013 12:25 AM
Thanks for your quick response, but I would like to receive in-depth information about this mode, such as those found for flex-connect.
06-12-2013 03:58 AM
Well first off, do you understand how a lightweight wireless system works? You need to know this first and there are many docs out there that explain this. Then if you want to know the limitations for FlexConnect, just look at any of the FlexConnect guides and then look at the table of contents for limitations or search the doc for key words. The information is out there and to write it in a post is just too much.
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide