11-18-2013 04:47 PM - edited 07-04-2021 01:17 AM
Is there an equivalent command to the "DIR Flash:" command that can be used on most IOS-based systems for the 5508 WLC?
I have been looking for one and I can not seem to locate it.
11-18-2013 04:53 PM
What are you looking for?
If you want to see the contents of the CF, there is no command that I am aware of.
If you want to see the size of the CF, then you can see this during the bootup process.
11-18-2013 06:20 PM
I agree with Leo... There is no command since the WLC isn't IOS but AirOS.
Sent from Cisco Technical Support iPhone App
10-18-2018 10:24 PM
Hi Scott/Leo,
How do i delete a file from the WLC.
In error i copied a new firmware for controller upgrades, however i need to revert that change, how do i do that.
Thanks
Deepak
10-18-2018 10:28 PM
10-18-2018 10:31 PM
Here is a link on managing images on Athens WLC.
10-18-2018 10:33 PM
Hello Scott,
Thanks for the swift reply.
This is the current problem i'm facing. We are upgrading to 8.3.143 code and Cisco document states that if there any outdoor AP's then we have to install the supplementary bundle post the reload of the WLC with 8.3.143 code.
However we pushed the new 8.3.143 code along with the supplementary bundle to the WLC, Now we wanted to do it fresh, that is first push only 8.3.143 code and then do a reload and then install supplemenatry bundle.
10-18-2018 10:51 PM
10-18-2018 10:54 PM
Yes that is correct Scott,
Unfortunately we uploaded the firmware and supplementary bundle together and expected a reboot would be enough.
Hence we would like to undo what we did already. How do we do that.
Do i just go ahead and upload the code only again so that it overwrites the code and the supplementary bundle?
10-19-2018 01:43 AM
10-19-2018 01:46 AM
Thanks Scott,
To re-iterate, once i add a new image it will overwrite the image previously copied along with the supplementary bundle?
Correct me if i'm wrong
10-19-2018 02:06 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide