Hi,
Who can tell me, what does means this logg messages on wlc 5760?
Jun 22 16:53:23: %IOSXE-7-PLATFORM: STANDBY:1 process wcm: capwap_nova_platform.c:3834 Error: Received unhandled capwap update event 5 (wlc-triss-1)
Jun 22 16:53:37: %IOSXE-7-PLATFORM: STANDBY:1 process wcm: capwap_nova_platform.c:3834 Error: Received unhandled capwap update event 5 (wlc-triss-1)
Jun 22 16:53:53: %IOSXE-7-PLATFORM: STANDBY:1 process wcm: capwap_nova_platform.c:3834 Error: Received unhandled capwap update event 5 (wlc-triss-1)
wlc-triss# sh redundancy
Redundant System Information :
------------------------------
Available system uptime = 4 weeks, 5 days, 2 hours, 30 minutes
Switchovers system experienced = 0
Standby failures = 0
Last switchover reason = not known
Hardware Mode = Duplex
Configured Redundancy Mode = SSO
Operating Redundancy Mode = SSO
Maintenance Mode = Disabled
Communications = Up
Current Processor Information :
------------------------------
Active Location = slot 2
Current Software state = ACTIVE
Uptime in current state = 4 weeks, 5 days, 2 hours, 30 minutes
Image Version = Cisco IOS Software, IOS-XE Software, 5700 Series Wireless LAN Controller Software (CT5760-IPSERVICESK9-M), Version 03.06.03.E RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2015 by Cisco Systems, Inc.
Compiled Wed 26-Aug-15 15:
BOOT = flash:ct5760-ipservicesk9.SPA.03.06.03.E.152-2.E3.bin;
Configuration register = 0x201 (will be 0x102 at next reload)
Peer Processor Information :
------------------------------
Standby Location = slot 1
Current Software state = STANDBY HOT
Uptime in current state = 4 weeks, 5 days, 2 hours, 27 minutes
Image Version = Cisco IOS Software, IOS-XE Software, 5700 Series Wireless LAN Controller Software (CT5760-IPSERVICESK9-M), Version 03.06.03.E RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2015 by Cisco Systems, Inc.
Compiled Wed 26-Aug-15 15:
BOOT = flash:ct5760-ipservicesk9.SPA.03.06.03.E.152-2.E3.bin;
Configuration register = 0x201 (will be 0x102 at next reload)