2 ISP process with difference Local ip address on ASA 5512x?
I would like all of you support me on my issue that, i have ASA 5512x, Cisco switch 3560 and cisco switch 2960. so i have 2 ISP( ISP 1 =3MB and ISP 2= 10MB) and ASA connect to Cisco switch 3560 and we manage Vlan on Cisco 3560. then i would like to vlan 1 access internet throught ISP1 and Vlan 2 access internet throught ISP2.
1- Does ASA 5512x can manage on this ?
2- Could we manage on ASA 5512 or manage on Cisco 3560?
As of June 2020, the Cisco ISE pxGrid App for QRadar Ver 1.1.0 is officially Validated and released by IBM, available for download from IBM XFE. Access the link to download app here.
The Cisco ISE pxGrid App V1.1 supports Cisco Identity Se...
i have an ip that is part of our internal network, i configured route map on the core to redirect the traffic to the firewall for further inspection.i checked the firewall logs i can see the traffic is redirect to the firewall successfully. i could ping o...
Hi, 1)May I know wht it means when context visibility Status showing 'disconnected" and '(blank)'?Difference between 'disconnected" and '(blank)'. Since both devices also not connected.I found tht these devices are no longer connected to the swi...
Hi ,I would like to configure multiple public ip (same subnet) on outside interface of ASA.I want to use static NAT for specific purpose.For example i have 8 public IP and I want to use 1 is internet ,1 for VPN ,1 for DMZ server and all ip want to a...
Hi all, Is it a way to retrieve the IPS policies from our IPS Appliance or censor? I have tried to look for a way but I am not able to do so. May I knwo any way can retrieve the policies from the Appliance either from the Appliance itself o...