I have set up email alerts and everything looks like it should be working. I get no errors from the mail relay but the email never gets sent. Does anyone know the path to the log file I can tail to see if CPAM is having an issue?
Ha! As it turns out there is a second place to define an outgoing email host.
if you right click on the automation driver and select edit, one of the options is the SMTP Server Settings.
That's the smtp server the automation driver uses. The other one is used in password recovery. In there you can enter the smtp server and if it needs it, a user and password to access the smtp server. Don't forget to fill in the location.
For all versions of the Email Security Appliance (ESA) and Security Management Appliance (SMA), some Secure Sockets Link (SSL) certificates issued from the QuoVadis root certificate authority (CA) trust chain before 2021-03-31 cannot b...
Automation and programmability for networking and security are increasingly important topics. Every release since ISE 1.2 has included new REST API capabilities to better automate and integrate ISE with the rest of your network, appli...
The latest iteration (v2.3.4) of the Cisco Secure Firewall Migration Tool adds public beta support for S2S VPN migrations from ASA:
Policy-based (crypto map) Pre-Shared key authentication type VPN configuration to Firepower Management Center
Cisco Defense Orchestrator (CDO) is a cloud-based, multi-device manager that manages security products like Adaptive Security Appliance (ASA), Firepower Threat Defense next-generation firewall, and Meraki devices, to name a few.
We make improvement...
This document presents the ISE data limiting best practices that can dramatically improve the system performance on ISE.
Your deployment may be impacted if the alarms tab on ISE shows High load average, high CPU or high memoy usage alarm...