FTD FDM dhcp client option 60

[martijn van der h]

I need to set dhcp option 60 on the ISP interface for IPTV.

I have a FTD 1010 FDM managed with the latest firmware 7.3.1-19.

How can this be done?

[Flavio Miranda]

Hi

 On the advanced  tab, you can add options.

[martijn van der h]

Where can I founf this screen?

This is on FMC I think.

[MHM Cisco World]

Use flexconfig add Dhcpd

[martijn van der h]

It is for the client not the server site.

I have tried : ip dhcp option 60 ascii "IPTV_RG" On the interface in flexconfig.

But ip.......... is not allowed!

[MHM Cisco World]

Sorry your ftd is ask op from server? That what you meaning?

[martijn van der h]

Yes: I have to send option 60 to the dhcp server of the ISP. 

[Rob Ingram]

@martijn van der h the command is dhcpd, so try dhcpd option 60 ascii IPTV_RG in FlexConfig.

[MHM Cisco World]

Since ftd is client here 

The command  as I think is 

Dhcp-client option 60 ....

[martijn van der h]

That option is for the dhcp server to set option 60

I need the option for the dhcp client on the interface from mij ISP. 

I have tried : ip dhcp option 60 ascii "IPTV_RG" 

That is failed because I may not use ip (on the interface) in the flexconfig. 

[MHM Cisco World]

ip dhcp client <<- start command with this