I've tried upgrading using both the Upgrade tool available in 6.3 and the cameras upgrade interface. The VSMS tool reports success but the camera web page and interface shows no difference. The cameras upgrade feature replys "Bad magic number". I turned off motion events and all other items that may interfere.
Dustin, What version of the firmware are you upgrading FROM? I've had some issues when upgrading from a firmware that is non-standard. That it I've been given firmwares by either TAC or the BU to address certain problems that have never been officially released for download. When trying to upgrade these it was first necessary to revert to a previous official release (say 1.03) before the upgrade would work. Hope this helps!
I was helping some friends and they were trying to solve a scalable VPN issues, specially these days with the pandemic situation.
I recommended to implement ASA VPN Load-Balancing.
This will allow to keep 1 FQDN for all RA-VPN users an...
Purpose of this article is to share our experience during that Covid-19 period where we were able to successfully setup a VPN configuration for remote worker using Alcatel 8068S phones with FTD 2110 running 188.8.131.52.I would like to thank all of my colleagu...
If you have ever configured central web authentication with ISE you understand that it requires one to configure ACL that dictates what traffic is to be redirected vs. let through without redirection. You also understand that this ACL needs to be config...
Cisco Defense Orchestrator (CDO) is a cloud-based multi-device manager that can manage security products like the Adaptive Security Appliance (ASA), the Firepower Threat Defense next-generation firewall, and Meraki devices, to name a few.&nb...