cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

688
Views
5
Helpful
1
Replies
Highlighted

Network configuration

I´ve been having some troubles with ipics 4.5, I can´t reach it using web browser. I enter the cli command network_config and every time I change the ip add, gateways, etc, the systems ask me to reboot and te changes are gone (I save the configuration). I continue checking the tomcat, it was stopped, Irestarted it but after like 1 minute it stops again, any idea?

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Beginner

Network configuration

To Modify Cisco IPICS server network settings:

IPICS 2.X modify_ip        IPICS 4.0 use network_config

Use this tool to facilitate changing the Cisco IPICS server network settings,

such as IP address or host name.

To change the current settings, enter the new values below.

To accept the existing values without making any changes, press Enter.

ip address for interface eth0[10.1.1.2]:

subnet mask for interface eth0[255.255.255.192]:

default gateway[10.1.1.1]:

host name[Reno-IPICS-1]:

domain name[cisco.com]:

DNS Server (0)[171.68.220.120]:

DNS Server (1)[171.70.168.183]:

DNS Server (2)[]:

DNS Server (3)[]:

Enter Y to confirm the new settings[No]:

MSP (Super Micro Multiservice Platform) Install Section 2-13

1 REPLY 1
Beginner

Network configuration

To Modify Cisco IPICS server network settings:

IPICS 2.X modify_ip        IPICS 4.0 use network_config

Use this tool to facilitate changing the Cisco IPICS server network settings,

such as IP address or host name.

To change the current settings, enter the new values below.

To accept the existing values without making any changes, press Enter.

ip address for interface eth0[10.1.1.2]:

subnet mask for interface eth0[255.255.255.192]:

default gateway[10.1.1.1]:

host name[Reno-IPICS-1]:

domain name[cisco.com]:

DNS Server (0)[171.68.220.120]:

DNS Server (1)[171.70.168.183]:

DNS Server (2)[]:

DNS Server (3)[]:

Enter Y to confirm the new settings[No]:

MSP (Super Micro Multiservice Platform) Install Section 2-13