07-18-2008 09:12 AM - edited 03-15-2019 12:03 PM
Hi,
I have a router with 12.4(13r)t with about 20 IP Phones registered. We had a funny problem, hope to get some insight if it's a telco problem or config.
We tried to get 1 phone to forward all inbound call to his cell. So as usual practice, he press CFwdAll and start punching the digits. For example, 916xxxxx0001 and press #.
Then when he call direct to his fix line, the caller heared "Wireless number cannot be reached" or "cant dial the number at the moment". If he dial out using the same pattern (ie: 916xxxxxxx0001), he can rang out.
I did a isdn q931 and voip dialpeer, I got the correct Calling Part number but incorrect Called Party Number. I got the last 4 digit (0001) instead and show no match.
Called Party Number i = 0x80, '0001'
Plan:Unknown, Type:Unknown
Jul 17 14:01:38.132: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Calling Number=90xxxxxxxx, Called Number=0001, Voice-Interface=0x4672B508,
Timeout=TRUE, Peer Encap Type=ENCAP_VOICE, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_SPEECH
Let me know any info you need, I'll share it.
Thanks in advance!