12-23-2008 12:05 PM - edited 03-06-2019 03:07 AM
Hi,
I have just recover my c2960 switch uploading IOS by xmodem. During the orocedure I changed the baud rate to 115200 to make faster, and now I am not able to change it. I tried unset BAUD, set BAUD 9600... anytime I reboot the switch is again with 115200.
In show run after rebooting appears
line console 0
speed 115200
I have changed it with speed command and save, but is appears again after reboot.
Any idea?