12-29-2008 11:17 PM - edited 03-04-2019 03:16 AM
Hi everybody,
compliments of the season.
I added a four ports interface card (HWIC-4ESW) to our router 2800 series router (2811).
when i tried to configure an ip address on the fast ethernet 0/0/0 interface, it was showing me that i may not configure ip address on L2 link.
please what does this mean.
And how can i assign ip address to the interfaces.
The interfaces were installed so that I wouldnt have to use sub interfaces to link some of my networks.
I prefer using physical interface instead of sub interfaces which was why we got the extra interfaces but without being able to set ip address on the interfaces the purpose will be defeated.
Can some one help me out please.
Thanks for sharing from your experience.
Tom.
Solved! Go to Solution.