Hi Cisco NetPros,
i have a short question:
We are using several Cisco1841 routers.
The show clock command gives the output which i expect (Time = NTP time).
But the show log command give the output with a time stamp from UTC (i have to add 1 hour to get our real time here in germany).
Most of our other cisco equipement shows the correct time in the logs (UTC+1). Only the 1841s show UTC (not +1) in the log. Can i configure the 1841s, so they will give back the NTP time in the logs?
What would be the command to do this?
Thanks in advance for your answers!
Alexander
