I have installed SSH and it works with PuTTY. I then wanted to use SCP. I enabled the SCP server on the switch: ip scp server enable.
First I logged in to the switch using PuTTY.
I tried using WinSCP from SourceFire. I found that it doesn't work and forum users say that the SCP transfer must be initiated FROM the Switch/Router.
The command should look something like Router# copy flash:c3620-ik9s-mz.122-0.17.T scp://tiger@10.1.1.2/
Error message: Connections to that host not permitted from this terminal.
