Hi all,
The router comes with IOS c2800nm-adventerprisek9_ivs-mz.124-24.T. This router default with 2 x gigabit ports.
The sh ver shows 3 Gigabit ports the extra port from NME module.
The issue are as below
1. All the NME fast ethernet ports (Total 23 ) are not visible in the sh run command.IP phone connected has no power.
2. The Gigabit port visible also not supporting the POE. I confirmed it by connecting tht IP phone.
3.The new image compatible with the NME module c2800nm-adventerprisek9-mz.124-22.YB4 also UPLOADED but the result is same.
Please help how to make the module working with this router.
swami
