04-11-2011 10:07 AM - edited 03-19-2019 02:43 AM
Hi
Customer has SCCP phones and 8961 SIP phones.
I'm testing SRST today on a Cisco 3925 running the very latest IOS (version c3900-universalk9-mz.SPA.151-3.T.bin
I noticed that this version does not support all of the commands/syntax provided in the documentation.
Please could somebody have a look at the configuration below and let me know if it should work or if there is anything that I need to add.
I've not worked with SIP phones in SRST mode so I would really appreciate a response back today (hopefully before the testing!).
Thanks
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
!
voice register pool 10
id network 172.26.10.0 mask 255.255.0.0
dtmf-relay rtp-nte cisco-rtp sip-notify
codec g711ulaw
no vad
!
voice register pool 11
id network 172.26.11.0 mask 255.255.0.0
dtmf-relay rtp-nte cisco-rtp sip-notify
codec g711ulaw
no vad
!
sip-ua
registrar ipv4:172.26.10.240 expires 600
(172.26.10.240 is the SRST gateway IP address).
On UCM SRST reference configuration for gateway
SIP Network/IP Address 172.26.10.240
5060