Hi Guys,
I tried to build a port channel between 2 interfaces from 2 different fex with the same Parent switch but failed to do so.
The parent switch which i have tested is the Nexus 7010 and 5020.
N7K-01(config)# int e101/1/1,e102/1/1
N7K-01(config-if-range)# channel-group 2000 force mode active
command failed: port not compatible [Members in multiple FEX]
on the Nexus 7000, im using NX-OS 6.0.2.
Is this a normal behavior on the Nexus? I can't seem to find this documented on Cisco website.
