02-10-2012 08:04 PM - edited 03-04-2019 03:13 PM
Hi,
I'm unable to assign port E2/1 to port channel. I get following error:
NEXUS5K(config)# int e2/1
NEXUS5K(config-if)# switchport mode trunk
NEXUS5K(config-if)# channel-group 14 mode active
command failed: port not compatible [port allowed VLAN list]
How do I resolve it?
========
below is port config:
interface Ethernet2/1
switchport mode trunk
spanning-tree port type edge
interface port-channel14
switchport mode trunk
vpc 14
switchport trunk allowed vlan 2004