06-23-2012 04:55 AM
After performing a firmware upgrade on an SG300-20 switch from ver 1.1.0.73 to 1.2.5.70 the switch now boots up with the following error and resets:
30-Aug-2011 10:47:33 %L1Mngr-F-PARAMTOOLONG: csco-sb parameter %s is too long.
The attached file contains a full output of the console boot process.
I have tried loading different versions from the console, but all produce the same error.
Has any one any idea how to resolve this issue?
Thanks
Des