06-27-2012 07:54 AM - edited 03-11-2019 04:23 PM
Hello..
I am trying to port forwarding Exchange 2010 OWA using ASA5505, wherever I used object NAT or Twice NAT it just doesn't work.... here is my config:
access-list outside-access remark "Exchange Server Access Rules"
access-list outside-access extended permit tcp any host <public x.x.x.11> eq smtp
access-list outside-access extended permit tcp any host <public x.x.x.11> eq https
object network exchange-smtp
host <private x.x.x.8>
nat (dmz,outside) static <public x.x.x.11> service tcp smtp smtp
exit
object network exchange-https
host <private x.x.x8>
nat (dmz,outside) static <public x.x.x.11> service tcp https https
exit
note that i use public ip <public x.x.x.9> on the outside interface for PAT, so all hosts in the same private can access internet
thax