Hello Experts,
I've installed Windows 2008 Enterprise on Bare-metal UCS B-200 M2 server with VIC M81KR Mezannine card. UCS Manager version is 1.3(c).
The Problem that I have is that I cannot define VLANs on the NIC adapter inside Windows. is this a problem with the NIC driver ?
( Other NIC cards in other machine for example, have Advnaced Tab in the network configuration where we can define VLANs ).
( in this situation, Windows is un-aware of the VLANs so all the traffic going out will be untagged and FI sending it to the native VLAN on the network).
Attached is a screenshot of the NIC properties in Windows. Your help is highly appreciated on this.
Regards,
Mohammad
