10-18-2012 04:26 PM - edited 03-07-2019 09:33 AM
Hi, I'm experiencing some strange scenario on 2 3750x switches in stack mode.
After updating the IOS from 12.2(53r)SE1 to 15.0(2)SE, I'm getting some annoying logs like this:
%PLATFORM_STACKPOWER-4-UNDER_BUDGET: Switch 1 does not have sufficient power budget
Then checking the stack-power config I noticed that the Power budget from switch 1 is different from switch 2:
Power Stack Stack Stack Total Rsvd Alloc Unused Num Num
Name Mode Topolgy Pwr(W) Pwr(W) Pwr(W) Pwr(W) SW PS
-------------------- ------ ------- ------ ------ ------ ------ --- ---
Powerstack-2 SP-PSS Ring 700 271 446 -17 2 2
Power stack name: Powerstack-2
Stack mode: Power sharing strict
Stack topology: Ring
Switch 1:
Power budget: 206
Power allocated: 223
Low port priority value: 22
High port priority value: 13
Switch priority value: 4
Port 1 status: Connected
Port 2 status: Connected
Neighbor on port 1: Switch 2 - c471.fe35.d600
Neighbor on port 2: Switch 2 - c471.fe35.d600
Switch 2:
Power budget: 223
Power allocated: 223
Low port priority value: 21
High port priority value: 12
Switch priority value: 3
Port 1 status: Connected
Port 2 status: Connected
Neighbor on port 1: Switch 1 - c471.fe56.5b00
Neighbor on port 2: Switch 1 - c471.fe56.5b00
I searched a lot throught the internet but didn't found anything, only that the first IOS version power budget was 206 and any IOS after this uses 223.
Do you guys have any idea what i can do?
I already changed the Stack mode to redundant, strict and non-strict, but the problem remais.
Also, this model of switch 3750X consumes a lot of CPU, the HULC Led Proccess keeps on 30% almost all the time.
If you guys could help me I'll really appreciate.
Thanks in advance,
Cristiano.