I am trying to convert two Aironet 1141n access points to autonomous stand-alone units. I have connected the console cable and I can see the unit giving information in the console window, but I cannot type any commands. When I try to get the unit to upload the c1140-k9w7-tar.default file by holding the mode button in for 20-30 seconds, it shows it is examining the file, and then states that the connection to the tftp server has timed out. My windows firewall is off, the interface is configured as 10.0.0.2 255.255.255.0 and the tftp server is showing that. What am I doing wrong? Thanks, Dennis
