11-29-2012 05:47 AM - edited 03-07-2019 10:18 AM
Hi,
is there a way to make aaa authentication requests source from a specific interface on a device? On remote DMVPN devices there are two tunnel interfaces and one VLAN 10 interface. The DMVPN device seems to send requests from one tunnel address or the other so, to get around this I have entered both tunnel IP scopes in the ACS server. This solves the problem but, if I could send aaa requests out the VLAN 10 interface - then, I would only have to enter one scope in the ACS server.
Thanks, Pat.
Solved! Go to Solution.