Hi,
Have a EX90 with TC5.1.2.289652 and a SX20 with TC5.1.3.292001 software.
We set the QoS to be 34 for video, 0 for data, and 46 for audio but on restart of device these 3 values get all set to 34.
CUCM is set to use AF41 (34) for video and Telepresence. Do these devices get this setting from CUCM and apply same value to all 3 settings or is there something else going on?
The CUCM version is 8.6.2. We'll be upgrading to 9.1 soon but just wanting to get this figured out.
On EX90 and SX20 web page, under Configuration -> Advanced configuration
Network 1 QoS Section
Audio, Video, Data all set to 34 on each restart, need to manually set audio to 46 and data to 0 on each restart.
Thanks,
Erick
