03-13-2013 05:39 AM - edited 03-16-2019 04:14 PM
I have a big problem , i have a customer in saudi arabia who have cisco unity and cisco call manager . The configuration is ok , the problem that when we get an incoming call on the FXO the call handler gets the call and all things are working fine , after the call is ended the FXO is still busy for 2 minutes. Kindly be informed i did not upload this , after i did all thinngs (required configuration) . Please help me .
voice class dualtone-detect-params 2
freq-max-power 6
freq-min-power 25
freq-power-twist 15
freq-max-delay 16
cadence-variation 8
!
voice class custom-cptone STC
dualtone busy
frequency 425 425
cadence 500 500
dualtone ringback
frequency 425 425
cadence 1000 4000
dualtone reorder
frequency 425 425
cadence 250 250
dualtone out-of-service
frequency 425 425
cadence 320 320
voice class custom-cptone Disconnect
dualtone disconnect
frequency 425
cadence 250 250
voice-port 0/0/0
supervisory disconnect dualtone mid-call
supervisory custom-cptone STC
supervisory dualtone-detect-params 2
voice class custom-cptone Disconnect
timeouts call-disconnect 1
timeouts wait-release 1
no battery-reversal
cptone BE
timeouts initial 5
timeouts interdigit 3
timeouts ringing 5
timeouts wait-release 1
timing hookflash-out 50
timing guard-out 300
timing sup-disconnect 300
connection plar opx 8800
impedance complex2
caller-id enable
Thank you
Islam kamal