05-29-2013 05:46 AM - edited 03-07-2019 01:37 PM
Hi,
I was wondering if someone could help.
I recently changed the entire configuration on two 6509 switches, and the fibre modules on slot 7 and 8 have gone down on BOTH switches. It would be easy to say that its a hardware fault but I cannot understand how module 7 and 8 can go down on both switches. Initially I thought it maybe due to IOS bug 22-33.SXI2a.bin" so I upgraded it to s72033-advipservicesk9_wan-mz.122-18.SXF12a.bin but it still down.
These are the actions I have carrried out to try resolve the issue:
- Reverted back to orginal configs but no luck
- Tried to use "power enable" command but the status light on both modules seems to turn red and then go off again.
- I have also tried to put one of the fibre modules into a different slot but no joy
- Upgraded the IOS from 22-33.SXI2a. to 122-18.SXF12a
I am running out of ideas.. can anyone help ? I am sure that hardware fault cannot occur on BOTH modules 7 & 8 on BOTH switches after config change.
The error in the log shows that modules "failed to bring online because of registration timer event". I understand this means that it is unable to download the image within the allocated time.. maybe I could manually copy the image onto the line card if that is possible ?? any ideas ?
Daughterboard WS-SUP720 SAL135063V2 4.0 Ok
7 Centralized Forwarding Card WS-F6700-CFC SAL1419HKJK 4.1 PwrDown
8 Centralized Forwarding Card WS-F6700-CFC SAL1419HAG0 4.1 PwrDown
Mod Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
7 5475.d016.075c to 5475.d016.075f 3.1 Unknown Unknown PwrDown
8 5475.d0bb.7404 to 5475.d0bb.7407 3.1 Unknown Unknown PwrDown
System image file is "disk0:s72033-advipservicesk9_wan-mz.122-18.SXF12a.bin"
BOOT variable = disk0:s72033-advipservicesk9_wan-mz.122-18.SXF12a.bin,12;sup-bootdisk,1;
CONFIG_FILE variable =
BOOTLDR variable =
Configuration register is 0x2102
Standby is not present.
May 28 17:25:10.352: %C6KPWR-SP-4-DISABLED: power to module in slot 7 set off (Module Failed SCP dnld)
May 28 17:25:10.452: %ONLINE-SP-6-REGN_TIMER: Module 8, Proc. 0. Failed to bring online because of registration timer event
sm(cygnus_oir_bay slot8), running yes, state wait_til_online
Last transition recorded: (disabled)-> disabled (disabled)-> disabled2 (restart)-> wait_til_disabled (timer)-> may_be_occupied (timer)-> occupied (known)-> can_power_on (yes_power)-> powered_on (real_power_on)-> check_power_on (timer)-> check_power_on (power_on_ok)-> wait_til_online
May 28 17:25:10.452: %C6KPWR-SP-4-DISABLED: power to module in slot 8 set off (Module Failed SCP dnld)
May 29 11:41:16.601: %SYS-5-CONFIG_I: Configured from console by console