05-30-2013 08:16 AM
Hi all,
I´m setting up our new PI 1.2. After we discovered devices and successfully added, PI started to hit CPU devices every 10 minutes, when SNMP poll runs.
CPU utilization for five seconds: 99%/11%; one minute: 29%; five minutes: 17%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
272 23536856 1524766 15436 86.62% 17.07% 5.06% 0 SNMP ENGINE
Is there any custom field to prevent this kind of snmp abuse on our devices?
If you need any further information, please let me know.
Regards