Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,We deployed a new pair of VSM in HA. After that, we powered-off VSM and others VMs to restart ESXi hosts.After reboot 1000v changed its extension-key so we cannot connect it to vcenter server. VEMs cannot connect to vsm, vms veths were down fr...
Hi all, thanks in advance for helping everybody here.1) Is it possible to run VSM VM over VMWare, just for manage hyper-v VEMs? 2) Is it mandatory to run on MS 2012 the Hyper-v´s VSMs? 3) What can we do when a VSM VM kept on Loader loading stage1.5? ...
Hi all,We have a CPI 1.3 up and running but with this issue. Cisco Prime Network Control System------------------------------------------Version : 1.3.0.20/dev/mapper/smosvg-optvol 200G 162G 28G 86% /optI followed the procedure on cleaning up dat...
Hi all,We have a fresh installation working fine on HA mode and with 1 single VEM running on a Hyper-V 2012 host.We are testing connectivity by ping and there is in some cases 1.5% up to 3.5% aprox.While we are running ping to 4 VMs created on this V...
Hi all,It´s my first time installing this over Hyper-V, I took some labs over VMware and everythings worked fine.We have a fresh install of Nexus 1000v for Hyper-v. We made the manual installation because an error got during the wizard installation p...
Get the descriptions from .1.3.6.1.2.1.47.1.1.1.1.2
And then poll
.1.3.6.1.4.1.9.9.91.1.1.1.1.4 (entSensorValue)
.1.3.6.1.4.1.9.9.91.1.1.1.1.5 (entSensorStatus)
.1.3.6.1.4.1.9.9.91.1.2.1.1.4 (entSensorThresholdValue)
To give you a few examples.
Hi all,I downloaded this plugin and run it into my centreon/nagios system and it worked just fine.I had to manually load the .cfg files generated by the autodiscover.py from centreon web interface, just to try this plugin.Great job!
Hi all,I found an stp issue on DELL switches. It had a port-channel blocked by stp but it wasn´t really true. So I found myself looped when I started to follow my own diagram in every case to figure it out what was happening. We will fix this issue w...
Hi Iouis,The SCVMM (2012 SP1 UR3) is a physical blade with 2 interfaces and just 1 connected.The HYV204 is another blade (M710HD) with 4 interfaces connected to the same stacked switches DELL M6348 and it has 1 physical interface for mgmt purpose (wi...
Hi Robert, do you know if vempkt works on Hyper-v? I ran the capture from my VSM and It didn´t work.vempkt display detail all doesn´t show anything neither exporting the capture, it´s empty. Is it an unsupported feature on Hyper-v?ACANWXN1KV01(config...
