We have several Codian Gateways that are running the new 2.2 software.
This software now includes direct SIP protocol capability.
My question is HOW do I configure the GW...
I'm very familar with how it works with H.323.... (Prefix refgistration)
There are only 3 options under the setting on the web interface.... and the help is not very much help
I looked at the documentation page under the Configuration and Programming guides and there was nothing that helps...
Is the a plain engish guide on how to set this up with examples...
I would like my SIP only endpoints to be able to make GW calls without the complexity associated with a Traversal SIP to H.323 transcoding.
If someone had done this or if thre is a document on the Cisco site that I missed, I would appreciate the help.
Thanks
