I have a fairly new setup with CUCM and CUC running 9.1 version. Calls are going to the CUBE via SIP trunk from the provider, then they get sent via another SIP trunk to the CUCM, which then forwards it to the Call Handler in CUC (for business hours and holiday reasons). CUC then redirects the calls to Hunt Group 600 to ring the required phones.
Now when the some makes a call to the system from outside does not hear any ringing. However if the person is to call a someone's phone directly then the tone is there. DDI and main number use the same Route Pattern for translation and I have the outside dialtone ticked on the CUBE config as well as the Hunt Group.
Am I missing something?
