Hi,
I've configured a vNIC placement policy with virtual slot 1 configured as "assigned only" and slots 2-4 left set to the default setting of "all".
The service profile template includes 8 x vNICs and 2 x vHBA's. All of the vNICS and vHBA's are assigned to vCON1.
The 2 x vHBA's have a desired order of 1 and 2 followed by the 8 NICS with an order from 3 - 10.
When I create a service profile from template however, the vNIC's have an actual order of 1 - 8 and the vHBA's have an actual order of 9-10.
I've re-created the template, re-created the service profiles but still can't get the vHBA's to an order of 1 and 2 followed by the vNICS.
Running UCS Manager 2.1 (3a)
Any help would be appreciated.
Thanks
