07-15-2014 02:30 PM - edited 03-01-2019 11:45 AM
Trying to setup but having issues getting raid mirror. With Flexflash enabled in local disk policy, I can boot and see it no issues. To setup the raid side I understand that for some reason we are to create a scrub policy with flexflash scrub enabled.
Is the process to apply this scrub to a service profile
Disassociate the service profile in order to active the scrub policy
Associate service profile and install hypervisor assuming raid mirror was created by scrub policy ??
Please clarify this portion for me please on customer site setting up with 2x16GB SD cards from Cisco installed in B200M3's with 2.2(2c) firmware installed. I can install and boot to them but not clear on raid process via a scrub policy.
Dave