09-24-2014 10:53 PM - edited 03-07-2019 08:52 PM
Hi Team
We happen case GLC-T with Catalyst 2960 Hang , It can't work
We was reload switch but same ( GLC-T with Catalyst 2960 Hang)
and use command bellow
Switch97#
Switch97#
Switch97#sh int gi 1/0/26 transceiver 5 transceiver de
Switch97#sh int gi 1/0/25 transceiver detail
hulc_sfp_iic_intf_read_eeprom sfp _index 0 yeti_iic_read_retry fail
hulc_sfp_iic_intf_read_eeprom sfp _index 0 yeti_iic_read_retry fail
hulc_sfp_iic_intf_read_eeprom sfp _index 0 yeti_iic_read_retry failDiagnostic Monitoring is not implemented.
Switch97#
Switch97#
Switch97#sh int gi 1/0/25 transceiver detail 6 transceiver de
Switch97#sh int gi 1/0/26 transceiver detail
hulc_sfp_iic_intf_read_eeprom sfp _index 1 yeti_iic_read_retry fail
hulc_sfp_iic_intf_read_eeprom sfp _index 1 yeti_iic_read_retry fail
hulc_sfp_iic_intf_read_eeprom sfp _index 1 yeti_iic_read_retry failDiagnostic Monitoring is not implemented.
We try IOS Software EX3, EX4, EX5 and 15-2.2 but can't problem
Please suggest case to me