hello, my question is : what is the procedure to replace a border node in case of hardware failure? this question since part of the configuration is manual ( ibgp between border) and another is provisionned ("lan automation, ...) thanks
Hello,I have a question about the trunk connection between border and fusion router . when provisionning overlay network , DNAC implement vlan range start to 300X for the connection vlan/vrf of the VN . this is mandatory or you can change this range...
Hi all, i have to implement a network customer over a vpls provider ( 60 site L2 any to any).which protocol for this design ? eigrp, ospf or bgp with advantage or inconvenient? thanks,
Hi all,I have a CNR with this logs:Server name/dhcp/1: 0 Unable to find necessary Client information in Inform packet from MAC address: '1,6,00:00:00:00:00:00'. Packet dropped!what does it mean and what solution for search the cause?Thanks
hello, ok for the design and high availabilty but the question is :in case of failure of a border ( hardware , RMA for the switch) - push the saved config of the border on the new equipementor- discover the new equipement installed with a manual part...
thank for your response , this design concern 3 or 4 central site with 200-500 mb/s and this other sites with 20 mb/s.the model hub / spoke model is not desired by the customer.How many router(neigbor) eigrp or osfp possible on a provider vlan ,mul...
Thank for the response,but i have atready see this issue but it'sn't my problem.I have trace the port of the cnr and i have see a printer server which send a DHCPINFORM with option 43 . This packet isn't recognize by the CNR and the log is generate...
