11-06-2014 09:39 AM - edited 03-07-2019 09:24 PM
Hello
I have a 6807XL with VS-SUP2T-10G, and the 10 Gbps Line Card WS-X6816-10GE, when I tried to provision the join of the 6800IA, I got theses errors.
CORE(config)#interface tengigabitethernet 1/1/1
CORE(config-if)#switchport mode fex-fabric
Command rejected: Mode fex fabric not allowed on non FEX capable slot
CORE(config-if)#channel-group 1 mode on
Command rejected (Port-channel1, Te1/1/1): Cannot be part of bundle, Non FEX Capable Slot
What should be the solution for it??
Regards
Rafael Barba
Solved! Go to Solution.