Hi All,
What does the following comand do?
config network web-auth captive-bypass enable :
Will this command allow Apple devices to open a web browser automatically to input Web Auth credentials when they connect to the SSID?
I've a controller - WiSM2 acting as Foreign and 5508 in the DMZ acting as Anchor for Guest traffic. All internal traffic is terminated on the WiSM2.
2 SSIDs: intenal with Web-auth against LDAP ; Guest with Web-auth passthrough.
On both Controllers, I've enabled "config network web-auth captive-bypass". Both controllers are running on AirOS code 8.0.100.0
Apple devices are not opening web-browser automatically when they connect to the SSID.
If you open the browser and enter google.com or anything; then it'll be redirected to the Web-Auth login page.
Do I need to enable onfig network web-auth captive-bypass or disable it?
Thanks,
Jagan
