03-16-2015 02:42 AM - edited 03-07-2019 11:06 PM
Hi guys,
I have some HiPath PBXs connected in the network using a dedicated VLAN.
While their uplink is a UTP port in any 2950 class Cisco switch, everything is working fine.
When replacing the switch with a newer 2960 class. not working anymore.
Moving back to 2950 - start working again.
Switches have same VLAN configuration, port configuration... everything identical except switch model.
This happens for HiPath 4000 as well as HiPath 3000 PBXs.
If any idea on this... much appreciated.
Thank you,
Catalin