02-11-2015 08:36 AM - edited 03-17-2019 01:56 AM
Hi,
we have 2921 with CME with a VIC2-4FXO connected to the telco providers network. Everything worked fine for a couple of months,
but since a few days we have a heavy distortioned ("motor") noise when we want to do an outside call (or receive an inbound call)..
Any ideas of how to troubleshoot this?
Relevant configuration extract:
voice-port 0/0/0
cptone EG
connection plar opx 1111
impedance complex1
!
voice-port 0/0/1
cptone EG
connection plar opx 1111
impedance complex1
!
!
dial-peer voice 1 pots
description ** In and Out **
destination-pattern 0.T
port 0/0/0
!
dial-peer voice 2 pots
description ** In and Out **
destination-pattern 0.T
port 0/0/1
!
Many thanks!
Heinz